Bretaris Genuair

Bretaris Genuair is indicated as a maintenance bronchodilator treatment to relieve symptoms in adult patients with chronic obstructive pulmonary disease (COPD).

Posology

The recommended dose is one inhalation of 322 micrograms aclidinium twice daily.

If a dose is missed the next dose should be taken as soon as possible. However, if it is nearly time for the next dose, the missed dose should be skipped.

Elderly

No dose adjustments are required for elderly patients.

Renal impairment

No dose adjustments are required for patients with renal impairment.

Hepatic impairment

No dose adjustments are required for patients with hepatic impairment.

Paediatric population

There is no relevant use of Bretaris Genuair in children and adolescents (under 18 years of age) for the indication of COPD.

Method of administration

For inhalation use.

Patients should be instructed on how to administer the product correctly as the Genuair inhaler may work differently from inhalers the patients may have used previously. It is important to instruct the patients to carefully read the Instructions for Use in the Package Leaflet, which is packed together with each inhaler.

Paradoxical bronchospasm:

Administration of Bretaris Genuair may cause paradoxical bronchospasm. If this occurs, treatment with Bretaris Genuair should be stopped and other treatments considered.

Deterioration of disease:

Aclidinium bromide is a maintenance bronchodilator and should not be used for the relief of acute episodes of bronchospasm, i.e. as a rescue therapy. In the event of a change in COPD intensity while the patient is being treated with aclidinium bromide so that the patient considers additional rescue medication is required, a re-evaluation of the patient and the patients' treatment regimen should be conducted.

Cardiovascular effects:

Cardiovascular safety profile is characterized by the anticholinergic effects.

Bretaris Genuair should be used with caution in patients who had a myocardial infarction during the previous 6 months, unstable angina, newly diagnosed arrhythmia within the previous 3 months, or hospitalisation within the previous 12 months for heart failure functional classes III and IV as per the “New York Heart Association”. Such patients were excluded from the clinical trials because these conditions may be affected by the anticholinergic mechanism of action.

Anticholinergic activity:

Dry mouth, which has been observed with anticholinergic treatment, may in the long term be associated with dental caries.

Consistent with its anticholinergic activity, aclidinium bromide should be used with caution in patients with symptomatic prostatic hyperplasia or bladder-neck obstruction or with narrow-angle glaucoma (even though direct contact of the product with the eyes is very unlikely).

Excipients:

This medicinal product contains lactose. Patients with rare hereditary problems of galactose intolerance, the Lapp lactase deficiency or glucose-galactose malabsorption should not take this medicinal product.

Aclidinium bromide may have minor influence on the ability to drive and use machines. The occurrence of headache, dizziness or blurred vision following administration of aclidinium bromide may influence the ability to drive or to use machinery.

Summary of the safety profile

The most frequently reported adverse reactions with Bretaris Genuair were headache (6.6%) and nasopharyngitis (5.5%).

Tabulated summary of adverse reactions

The frequencies assigned to the undesirable effects listed below are based on crude incidence rates of adverse reactions (i.e. events attributed to Bretaris Genuair) observed with Bretaris Genuair 322 µg (636 patients) in the pooled analysis of one 6-month and two 3-month randomised, placebo-controlled clinical trials.

The frequency of adverse reactions is defined using the following convention: very common (>1/10); common (>1/100 to <1/10); uncommon (>1/1,000 to <1/100); rare (>1/10,000 to <1/1,000); very rare (<1/10,000) and not known (cannot be estimated from the available data).

* The incidence of nausea in clinical trials was lower for aclidinium bromide than for placebo (43.9 vs 48.3 per 1000 patient-years respectively)

Reporting of suspected adverse reactions

Reporting suspected adverse reactions after authorisation of the medicinal product is important. It allows continued monitoring of the benefit/risk balance of the medicinal product. Healthcare professionals are asked to report any suspected adverse reactions (see details below).

United Kingdom

Yellow Card Scheme, Website: www.mhra.gov.uk/yellowcard or search for MHRA Yellow Card in the Google Play or Apple App Store.

High doses of aclidinium bromide may lead to anticholinergic signs and symptoms.

However, single inhaled doses up to 6,000 µg aclidinium bromide have been administered to healthy subjects without systemic anticholinergic adverse reactions. Additionally, no clinically relevant adverse reactions were observed following 7-day twice daily dosing of up to 800 µg aclidinium bromide in healthy subjects.

Acute intoxication by inadvertent medicinal product ingestion of aclidinium bromide is unlikely, due to its low oral bioavailability and the breath-actuated dosing mechanism of the Genuair inhaler.

Pharmacotherapeutic group: Drugs for obstructive airway diseases, anticholinergics; ATC Code: R03BB05.

Mechanism of action

Aclidinium bromide is a competitive, selective muscarinic receptor antagonist (also known as an anticholinergic), with a longer residence time at the M₃ receptors than the M₂ receptors. M₃ receptors mediate contraction of airway smooth muscle. Inhaled aclidinium bromide acts locally in the lungs to antagonise M₃ receptors of airway smooth muscle and induce bronchodilation. Nonclinical in vitro and in vivo studies showed rapid, dose-dependent and long-lasting inhibition by aclidinium of acetylcholine-induced bronchoconstriction. Aclidinium bromide is quickly broken down in plasma, the level of systemic anticholinergic side effects is therefore low.

Pharmacodynamic effects

Clinical efficacy studies showed that Bretaris Genuair provided clinically meaningful improvements in lung function (as measured by the forced expiratory volume in 1 second [FEV₁]) over 12 hours following morning and evening administration, which were evident within 30 minutes of the first dose (increases from baseline of 124-133 mL). Maximal bronchodilation was achieved within 1-3 hours after dosing with mean peak improvements in FEV₁ relative to baseline of 227-268 mL at steady-state.

Cardiac electrophysiology

No effects on QT interval (corrected using either the Fridericia or Bazett method or individually-corrected) were observed when aclidinium bromide (200 µg or 800 µg) was administered once daily for 3 days to healthy subjects in a thorough QT study.

In addition, no clinically significant effects of Bretaris Genuair on cardiac rhythm were observed on 24-hour Holter monitoring after 3 months treatment of 336 patients (of whom 164 received Bretaris Genuair 322 µg twice daily).

Clinical efficacy and safety

The Bretaris Genuair Phase III clinical development programme included 269 patients treated with Bretaris Genuair 322 µg twice daily in one 6-month randomised, placebo-controlled study and 190 patients treated with Bretaris Genuair 322 µg twice daily in one 3-month randomised, placebo-controlled study. Efficacy was assessed by measures of lung function and symptomatic outcomes such as breathlessness, disease-specific health status, use of rescue medication and occurrence of exacerbations. In the long-term safety studies, Bretaris Genuair was associated with bronchodilatory efficacy when administered over a 1-year treatment period.

Bronchodilation

In the 6-month study, patients receiving Bretaris Genuair 322 µg twice daily experienced a clinically meaningful improvement in their lung function (as measured by FEV₁). Maximal bronchodilatory effects were evident from day one and were maintained over the 6-month treatment period. After 6 months treatment, the mean improvement in morning pre-dose (trough) FEV₁ compared to placebo was 128 mL (95% CI=85-170; p<0.0001).

Similar observations were made with Bretaris Genuair in the 3 month study.

Disease-Specific Health Status and Symptomatic Benefits

Bretaris Genuair provided clinically meaningful improvements in breathlessness (assessed using the Transition Dyspnoea Index [TDI]) and disease-specific health status (assessed using the St. George's Respiratory Questionnaire [SGRQ]). The Table below shows symptom relief obtained after 6 months treatment with Bretaris Genuair.

Patients treated with Bretaris Genuair required less rescue medication than patients treated with placebo (a reduction of 0.95 puffs per day at 6 months [p=0.005]). Bretaris Genuair also improved daily symptoms of COPD (dyspnoea, cough and sputum production) and night-time and early morning symptoms.

Pooled efficacy analysis of the 6-month and 3-month placebo controlled studies demonstrated a statistically significant reduction in the rate of moderate to severe exacerbations (requiring treatment with antibiotics or corticosteroids or resulting in hospitalisations) with aclidinium 322 µg twice daily compared to placebo (rate per patient per year: 0.31 vs 0.44 respectively; p=0.0149).

Exercise tolerance

In a 3-week crossover, randomised, placebo-controlled clinical study Bretaris Genuair was associated with a statistically significant improvement in exercise endurance time in comparison to placebo of 58 seconds (95% CI=9-108; p=0.021; pre-treatment value: 486 seconds). Bretaris Genuair statistically significantly reduced lung hyperinflation at rest (functional residual capacity [FRC]=0.197 L [95% CI=0.321, 0.072; p=0.002]; residual volume [RV]=0.238 L [95% CI=0.396, 0.079; p=0.004]) and also improved trough inspiratory capacity (by 0.078 L; 95% CI=0.01, 0.145; p=0.025) and reduced dyspnoea during exercise (Borg scale) (by 0.63 Borg units; 95% CI=1.11, 0.14; p=0.012).

Paediatric population

).

Absorption

Aclidinium bromide is rapidly absorbed from the lung, achieving maximum plasma concentrations within 5 minutes of inhalation in healthy subjects, and normally within the first 15 minutes in COPD patients. The fraction of the inhaled dose that reaches the systemic circulation as unchanged aclidinium is very low at less than 5%.

Steady state peak plasma concentrations achieved after dry powder inhalation by COPD patients of 400 µg aclidinium bromide were approximately 224 pg/mL. Steady-state plasma levels were attained within seven days of twice daily dosing.

Distribution

Whole lung deposition of inhaled aclidinium bromide via the Genuair inhaler averaged approximately 30% of the metered dose.

The plasma protein binding of aclidinium bromide determined in vitro most likely corresponded to the protein binding of the metabolites due to the rapid hydrolysis of aclidinium bromide in plasma; plasma protein binding was 87% for the carboxylic acid metabolite and 15% for the alcohol metabolite. The main plasma protein that binds aclidinium bromide is albumin.

Biotransformation

Aclidinium bromide is rapidly and extensively hydrolysed to its pharmacologically inactive alcohol- and carboxylic acid-derivatives. The hydrolysis occurs both chemically (non-enzymatically) and enzymatically by esterases, butyrylcholinesterase being the main human esterase involved in the hydrolysis. Plasma levels of the acid metabolite are approximately 100-fold greater than those of the alcohol metabolite and the unchanged active substance following inhalation.

The low absolute bioavailability of inhaled aclidinium bromide (<5%) is because aclidinium bromide undergoes extensive systemic and pre-systemic hydrolysis whether deposited in the lung or swallowed.

Biotransformation via CYP450 enzymes plays a minor role in the total metabolic clearance of aclidinium bromide.

In vitro studies have shown that aclidinium bromide at the therapeutic dose or its metabolites do not inhibit or induce any of the cytochrome P450 (CYP450) enzymes and do not inhibit esterases (carboxylesterase, acetylcholinesterase and butyrylcholinesterase). In vitro studies have shown that aclidinium bromide or the metabolites of aclidinium bromide are not substrates or inhibitors of P-glycoprotein.

Elimination

The terminal elimination half-life and effective half-life of aclidinium bromide are approximately 14 hours and 10 hours, respectively, following inhalation of twice daily 400 µg doses in COPD patients.

Following intravenous administration of 400 µg radiolabelled aclidinium bromide to healthy subjects, approximately 1% of the dose was excreted as unchanged aclidinium bromide in the urine. Up to 65% of the dose was eliminated as metabolites in the urine and up to 33% as metabolites in the faeces.

Following inhalation of 200 µg and 400 µg of aclidinium bromide by healthy subjects or COPD patients, the urinary excretion of unchanged aclidinium was very low at about 0.1% of the administered dose, indicating that renal clearance plays a minor role in the total aclidinium clearance from plasma.

Linearity/non-linearity

Aclidinium bromide demonstrated kinetic linearity and a time-independent pharmacokinetic behaviour in the therapeutic range.

Special populations

Elderly patients

The pharmacokinetic properties of aclidinium bromide in patients with moderate to severe COPD appear to be similar in patients aged 40-59 years and in patients aged >70 years. Therefore, no dose adjustment is required for elderly COPD patients.

Hepatically-impaired patients

No studies have been performed on hepatically-impaired patients. As aclidinium bromide is metabolised mainly by chemical and enzymatic cleavage in the plasma, hepatic dysfunction is very unlikely to alter its systemic exposure. No dose adjustment is required for hepatically-impaired COPD patients.

Renally-impaired patients

No significant pharmacokinetic differences were observed between subjects with normal renal function and subjects with renal impairment. Therefore, no dose adjustment and no additional monitoring are required for renally-impaired COPD patients.

Race

Following repeated inhalations, the systemic exposure of aclidinium bromide has been observed to be similar in Japanese and Caucasian patients.

Pharmacokinetic/pharmacodynamic relationship

Because aclidinium bromide acts locally in the lungs and is quickly broken down in plasma there is no direct relationship between pharmacokinetics and pharmacodynamics.

Nonclinical data reveal no special hazard for humans based on conventional studies of safety pharmacology, repeated dose toxicity, genotoxicity, and carcinogenic potential, toxicity to reproduction and development.

Effects in nonclinical studies with respect to cardiovascular parameters (increased heart rates in dogs), reproductive toxicity (fetotoxic effects), and fertility (slight decreases in conception rate, number of corpora lutea, and pre- and post-implantation losses) were observed only at exposures considered sufficiently in excess of the maximum human exposure indicating little relevance to clinical use.

The low toxicity observed in nonclinical toxicity studies is in part due to rapid metabolism of aclidinium bromide in plasma and the lack of significant pharmacological activity of the major metabolites. The safety margins for human systemic exposure with 400 µg twice daily over the no observed adverse effect levels in these studies ranged from 7- to 73-fold.

Not applicable.

Any unused medicinal product or waste material should be disposed of in accordance with local requirements.

Instructions for Use

Getting Started

Read these Instructions for Use before you start using the medicine.

Become familiar with the parts of your Genuair inhaler.

Before use:

a) Before first use, tear open the sealed bag and remove the inhaler. Throw away the bag.

b) Do not press the green button until you are ready to take a dose.

c) Pull off the cap by lightly squeezing the arrows marked on each side (Figure B).

STEP 1: Prepare your dose

1.1 Look in the opening of the mouthpiece and make sure nothing is blocking it (Figure C).

1.2 Look at the control window (should be red, Figure C).

1.3 Hold the inhaler horizontally with the mouthpiece facing you and the green button on top (Figure D).

1.4 Press the green button all the way down to load your dose (Figure E).

When you press the button all the way down, the control window changes from red to green.

1.5 Release the green button (Figure F).

Stop and Check:

1.6 Make sure the control window is now green (Figure G).

Your medicine is ready to be inhaled.

Go to 'STEP 2: Inhale your medicine'.

STEP 2: Inhale your medicine

2.1 Hold the inhaler away from your mouth, and breathe out completely. Never breathe out into the inhaler (Figure I).

2.2 Hold your head upright, put the mouthpiece between your lips, and close your lips tightly around it (Figure J).

2.3 Take a strong, deep breath through your mouth. Keep breathing in for as long as possible.

2.4 Take the inhaler out of your mouth.

2.5 Hold your breath for as long as possible.

2.6 Slowly breathe out away from the inhaler.

Stop and Check:

2.7 Make sure the control window is now red (Figure K). This means you have inhaled your medicine correctly.

Push the protective cap back onto the mouthpiece after each use (Figure M), to prevent contamination of the inhaler with dust or other materials. You should discard your inhaler if you lose the cap.

Additional information

What should you do if you accidently prepare a dose?

Store your inhaler with the protective cap in place until it is time to inhale your medicine, then remove the cap and start at Step 1.6.

How does the dose indicator work?

- The dose indicator shows the total number of doses left in the inhaler (Figure N).

- On first use, every inhaler contains at least 60 doses, or at least 30 doses, depending on the pack size.

Each time you load a dose by pressing the green button, the dose indicator moves by a small amount towards the next number (50, 40, 30, 20, 10, or 0).

When should you get a new inhaler?

You should get a new inhaler:

- If your inhaler appears to be damaged or if you lose the cap, or

- When a red band appears in the dose indicator, this means you are nearing your last dose (Figure N), or

- If your inhaler is empty (Figure O).

How do you know that your inhaler is empty?

When the green button will not return to its full upper position and is locked in a middle position, you have reached the last dose (Figure O). Even though the green button is locked, your last dose may still be inhaled. After that, the inhaler cannot be used again and you should start using a new inhaler.

How should you clean the inhaler?

NEVER use water to clean the inhaler, as this may damage your medicine.

If you wish to clean your inhaler, just wipe the outside of the mouthpiece with a dry tissue or paper towel.